Flowline LI90 Commander Manual do Utilizador descarregar pdf (Página 10)

10 of 57 PRELIMINARY MANUAL 27 AUG 08

Commander LI90 Series Rev 1_3

• DIN Rail Mounting

o The LI90 series is designed to clip onto standard 35 millimeter DIN rail. If your

installation requires liquid or dust protection, make sure the controller is placed in an

appropriate sealed panel when mounting on DIN rail. Use the following steps to

mount on DIN rail.

 Move the DIN rail clip to the lower position.

 Clip the “Top Clips” on the top of the DIN rail.

 Press the unit into place and press the DIN rail clip up. A small flat-head

screwdriver can be used in the slot of the DIN rail clip if clearance is an issue.

o Note: The DIN rail connection does not

provide an earth ground.

o For DIN rail, use a 35 mm DIN Rail.

 Move the DIN rail clip to the lower position.

 Clip the “Top Clips” on the top of the DIN rail.

 Press the unit into place and press the DIN rail clip up. A small flat-head

screwdriver can be used in the slot of the DIN rail clip if clearance is an issue.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 56 57

Sem comentários

Flowline LI90 Commander Manual do Utilizador Página 10